Oyaide NEO d+ Class B XFT Cable (XLR-Female to 1/4" TRS) — Green

Grabbing a signal from a source and dropping it into a TRS input is one of those quiet, unglamorous moves that either keeps your set locked in or leaves you chasing a fault mid-song. The Oyaide NEO d+ Class B XFT is the cable that takes an XLR-female connection and lands it cleanly into a 1/4" TRS input — the missing link between mics, mixer outputs, and that TRS jack waiting on your interface or active speaker. One tidy run, zero adapter Jenga, and a signal that arrives exactly the way it left. 🔌

Here's what makes it a no-brainer: it's balanced end to end, so you get real noise rejection over the whole run. That means the hum, buzz, and RF junk that creeps into unbalanced connections stays out of your sound, whether you're patching a stage or wiring up a bedroom studio. And it's pure d+ Class B — near high-end quality at a price a working DJ can actually justify.

Why the XFT Earns Its Spot

• Balanced XLR-female to 1/4" TRS in one clean run — Feed a mic, a mixer send, or an outboard source straight into a TRS input without stacking adapters or crossing your fingers. Plug in, level up, play.
• 18AWG high-purity oxygen-free copper — This OFC conductor is engineered to minimize signal loss and push a pure, dense signal down the line, so your low end stays tight and your top end stays crisp all the way to the speakers.
• 24K gold-plated bronze alloy terminals — Corrosion-resistant contacts on both the XLR-female and 1/4" TRS ends grip tight and hold rock-solid, load-in after load-in. No crackle, no flaky dropout when the room's counting on you.
• Flat twisted reverse concentric structure — That flat build coils and stacks like a dream behind the booth, but the real win is stability. The reverse concentric layout keeps impedance steady through every bend and twist, killing the distortion that plagues cheap round cables under real gigging stress.
• Three lengths to match the run — 1.0m, 2.0m, and 3.0m, so you're pairing the cable to the setup instead of coiling up slack or stretching one that's an inch too short.

The Build Doing the Heavy Lifting

Toughness is baked into every layer. The polyolefin insulator and flexible PVC sheath let the cable flex without fatigue through endless coils and cram-it-in-the-bag moments, while the PBT + glass fiber housing locks the connectors rigid right where the strain lives. This is a cable you can gig hard, coil up, and plug in a thousand times over — and it'll keep performing like new. And in that unmistakable d+ green, you'll spot it instantly in a knot of black cables when you're loading in against the clock.

Who It's For

• The club DJ patching a balanced mic or mixer output into a TRS input on active mains or a controller
• The sound engineer wiring XLR-female sources into TRS inputs on a stage or studio rig that has to stay dead quiet
• The producer routing mics and outboard gear into a TRS-equipped interface for tracking and capture
• The audiophile chasing a clean, balanced XLR-to-TRS link that won't color the signal

First-timer wiring a home setup or road-tested pro who's survived a thousand load-ins — the XFT slots in and disappears into the background, exactly how a great cable should behave.

Product Specifications

Lock in a clean, balanced signal path from mic to mixer to monitor — add the Oyaide NEO d+ Class B XFT to your cart today and stop trusting your sound to a mystery cable!